MP6-2S-1L-1Q-1Q-00 | ASTEC |Medium Power

Estimated Lead Time: 12-16 Weeks

Manufacturer: ASTEC

MP6-2S-1L-1Q-1Q-00

Case Size (mm) : 6 = 2.5" x 5" x 11";600W-800W, 5 Slots

Module/Voltage(s):2S-1L-1Q-1Q

Case with: 30V@12A;12V@17A;[email protected];[email protected]

Case Option: parallel code

Standard Options: no options

Adjustment range: ±10% minimum all outputs

Margining: ±4-6% nominal

Overall reg : 0.4% or 20 mV maximum(36 W modules 4% maximum)

Ripple RMS: 0.1% or 10 mV, whichever is greater; Pk-Pk: 1.0% or 50 mV, whichever is greater; bandwidth limited to 20 MHz

Dynamic response :<2% or 100 mV, with 25% load step

Recovery time : To within 1% in <300 ?second

Overcurrent protection :Single, main of dual output module 105-120% of rated output current

Short circuit protection: Protected for continuous short circuit Recovery is automatic upon removal of short

Overvoltage protection(measured at sense connection): Single output modules

Reverse voltage protection: 100% of rated output current

Thermal protection: All outputs disabled when internal temp exceeds safe operating range >5ms warning (AC OK signal) before shutdown

Cooling: Internal DC fan or customer provided air (option)

Input Range: 85-264 VAC; 120-350 VDC

Internal Fuse Rating: 15 A

Hold-up: 20 mS min

Leakage Current: 2.0mA

Turn-on Time: AC 1.5 sec; Inhibit 150mS

Power Factor: 0.99 typ @ full case load

Efficiency: 80% typical depending on Configuration

Inrush Current: 40A Peak (Soft Start)

Frequency: 47-440 Hz

Ripple: 0.1% RMS; 1.0% P-P @ 20MHz limit

Overall Regulation: 0.4% or 20mV max

Margining: +/- 4-6% of nominal

Adjustment Range: +/-10% minimum on all outputs

User Interface: ACOK; DCOK; Inhibit; V-Program; Sense

Safety: Per EN60950

Total Max Power:800 W

Total Max Current:160 A

Input Voltage:85 V to 264 V

Output Voltage:N/A

Outputs Size (L x W x H):11.000" x 5.000" x 2.500"

Warranty:2 years

Operating Temperature:-20°C to +70°C

Weight MP6 Case: 3.2 lbs

Shipping Weight : 2.3 Kg