Same day shipping
Manufacturer : Azbil
Part Number : HP100-T1
Detection method : Thru-scan
Scanning distance : 15m
L-ON/D-ON selection
Sensitivity adjustment
Wiring method : Preleaded
Cable length : 2m
Power supply : 10 to 30Vdc
Output mode : NPN open collector
Catalog listing : HP100-T1
Detection method : Thru-scan
Power supply : 10 to 30Vdc (ripple 10% max.)
Power consumption : HP100-E1: 16mA max. , HP100-R : 11mA max
Scanning distance : 15m
Target object : Opaque object 9mm dia. min.
Scanning angle : 2 to 20°
Operation mode : Light-ON / Dark-ON selectable by switch
Output mode*1 : HP100- 1: NPN open collector , HP100- 2: PNP open collector
Control output : Switching current: 100mA (resistive load). Output dielectric strength:
30V. Voltage drop: 3V max. (at 100mA switching current). Short-circuit protection
Response time : 500µs max. for both operation and recovery
Emitter : Red LED
Indicator : Indicators other than thru-scan emitter: orange when output ON, and green
at stable light-ON and light-OFF.
Thru-scan emitter: orange light on power supply indicator. Thru-scan receiver: light-operated red indicator on front of unit.
Ambient light immunity : Incandescent lamp: 10,000 lux max. Sunlight: 40,000 lux max
Operating temperature : –30 to +60°C (without freezing or condensation)
Operating humidity : 35 to 85% RH (without freezing or condensation)
Storage temperature : –40 to +70°C (without freezing or condensation)
Insulation resistance : 20M? min. (at 500Vdc)
Dielectric strength : 1,000Vac 50/60Hz for one minute between electrically live metal and case
Vibration resistance : 10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hours each in X, Y, and Z directions
Shock resistance : 500m/s2
10 times each in X, Y and Z directions
Protective structure : IP67 (IEC standard)
Wiring method : HP100- -LP5: preleaded (0.5m), HP100- : preleaded (2m), HP100- -
L05: preleaded (5m),
HP100- -CN03: M12 preleaded connector (0.3m), HP100- -CN05: M12 preleaded connector (0.5m),
HP100- -CN1: M12 preleaded connector (1m), HP100- -CT: M8 connector
Weight : Approx. 55g (body with 2m cable only)
Circuit protection : Power ON malfunction prevention circuit (approx. 8ms), wiring error protection
Shipping Weight : 2 Kg
