Same day shipping
Manufacturer: Autonics
Part Number : FX4 AC100-240
Model : Single preset FX4
Digit : 4 digit
FX- Counter/Timer
4-9999(4 digit)
Digit size : W8×H14mm
Power supply - AC Voltage type : 100-240VAC 50/60Hz
Power supply - AC/DC Voltage type : 12-24VAC 50/60Hz, 12-24VDC universal
Allowable voltage range : 90 to 110% of rated voltage
Power consumption
AC Voltage type : Indicator type: Approx. 6VA
AC/DC Voltage type : Indicator type: Approx. 5.8VA / Indicator type: Approx. 2.7W
Max. counting speed for CP1, CP2 : Selectable 1cps/30cps/2kcps/5kcps by internal DIP switch
Min. input signal width
RESET input : Approx. 20ms
INHIBIT input : Approx. 20ms
CP1, CP2 input(INHIBIT): Input logic is selectable
[Voltage input] Input impedance : 5.4k?, "H" level : 5-30VDC, "L" level : 0-2VDC
[No-voltage input] Impedance at short-circuit : Max. 1k?, Residual voltage at short-circuit : Max. 2VDC,
Impedance at open-circuit : Min. 100k?
One-shot output time
Single preset type - 0.05 to 5sec.
Dual preset type - 1st. output 0.5sec. fixed, 2st. output : 0.05 to 5sec
Control output
Type Single preset type : SPDT(1c), Dual preset type : 1st output SPDT(1c), 2nd output SPDT(1c)
Capacity : 250VAC 3A at resistive load
Solid state : Type Single preset: 1 NPN open collector
Dual preset: 1st output 1 NPN open collector, 2nd output 1 NPN open collector
Capacity : 30VDC Max. 100mA Max.
- Memory protection : Approx. 10 years(When using non-volatile semiconductor memory)
External sensor power : 12VDC±10% 50mA Max
Environment : Ambient temperature -10 to 55?, storage: -25 to 65?
Ambient humidity : 35 to 85%RH, storage: 35 to 85%RH
Insulation resistance : Min. 100M?(at 500VDC megger)
Dielectric strength : 2000VAC 50/60Hz for 1 minute
AC power : ±2kV the square wave noise(pulse width : 1?) by the noise simulator
DC power : ±500V the square wave noise(pulse width : 1?) by the noise simulator
Mechanical : 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour
Malfunction : 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Mechanical : 300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times
Malfunction : 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times
Relay life cycle
Mechanical : Min. 10,000,000 operations
Electrical : Min. 100,000 operations at 250VAC 2A(resistive load)
Approval : (Except for AC/DC power type)
unit weight :Approx. 385g (approx. 249g)
Shipping Weight : 1.5 Kg
