Same day shipping
MAnufacturer : SUNX
Product Number : EX-28B
Part Number : EX-28B
CE marking directive compliance : EMC Directive, RoHS Directive
Sensing range : 45 to 115 mm 1.772 to 4.528 in with white non-glossy paper (100 x 100 mm 3.937 x 3.937 in), spot diameter dia. 5 mm dia. 0.197 in with setting distance 80 mm 3.150 in
Sensing object : Opaque, translucent or transparent object (Note) (Min. dia. 1 mm dia. 0.039 in copper wire at setting distance 80 mm 3.150 in)
: (Note) Make sure to confirm detection with an actual sensor before use.
Hysteresis : 15 % or less of operation distance [100 x 100 mm 3.937 x 3.937 in with white non-glossy paper]
Repeatability(perpendicular to sensing axis) : 0.3 mm 0.012 in or less
Supply voltage : 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption : 15 mA or less
Output : NPN open-collector transistor
: - Maximum sink current: 50 mA
: - Applied voltage: 30 V DC or less (between output and 0 V)
: - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category : DC-12 or DC-13
Output:Short-circuit protection : Incorporated
Response time : 0.5 ms or less
Operation indicator : Orange LED (lights up when the output is ON)
Stability indicator : Green LED (lights up under stable light received condition or stable dark condition)
Sensitivity adjuster : Continuously variable adjuster
Operation mode switch : -
Protection : IP67 (IEC)
Ambient temperature : -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity : 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance : Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability : 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance : 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance : 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance : 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element : Red LED (modulated)
Emitting element:Peak emission wavelength : 650 nm 0.026 mil
Material : Enclosure: Polyethylene terephthalate
: Lens: Polyalylate
Cable : 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension : Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
Weight : Net weight: 20 g approx
: Gross weight: 45 g approx
Accessory : Adjusting screwdriver: 1 pc.
Shipping Weight : 1 Kg
