Estimated Lead Time : 1 - 10 working days.
Manufacturer : GM International
The dual channel Temperature Signal Converter D5072D accepts a low level dc signal from millivolt, thermocouple or 2-3-4 wire resistance/RTD or transmitting potentiometer sensor, located in Hazardous Area, and converts, with isolation, the signal to drive a Safe Area load, suitable for applications requiring SIL 2 level (according to IEC 61511) in safety related systems for high risk industries.
Output signal can be direct or reverse.
Modbus RTU RS-485 output is available on Bus connector.
Cold junction compensation can be programmed as:
- Automatic: provided by an internal temperature sensor.
- Fixed: to a user-customizable temperature value.
- Remote: connecting compensation RTD to one of the two ch.
For D5072D module: duplicator function provides two independent outputs from one single input. Output function can be configured as: Adder, subtractor, low/high selector.
Modules are provided with alarm function, which is available via photoMOS output, Termination Board and Power Bus.
Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2 or Class I, Zone 2.
mV, thermocouple, 2 or 3 or 4 wire resistance/RTD or transmitting potentiometer Input Signal.
2-wire RTD line resistance compensation.
Internal Reference Junction Compensation automatic or fixed (programmable value).
Fastest integration time: 50 ms
Fully customizable Output range from 0 to 24 mA Output Signal linear or reverse (typical 0/4-20 mA).
Output duplication possible for D5072D.
Modbus RTU RS-485 Output.
Independent multiple Fault detection.
Programmable alarm available on photoMOS output or Termination Board connector.
High Accuracy, µP controlled A/D converter.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
Fully programmable operating parameters.
High Density, two channels per unit.
Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.
Data logging and monitoring via software
Weight: about 135 g D5072D, 130 g
Shipping Weight 1.2 Kg
