CP1E-N30DR-A
CP-series CP1E CPU Units
CP1E
Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control
The CP1E Package PLCs: Economy, Easy, and Efficient
The E-type Basic CPU Units provide cost performance and easy application with only basic functionality.
The N-type Application CPU Units support Programmable Terminal connection, position control, and inverter connection
Programming, setting, and monitoring with CX-Programmer.
Easy connection with computers using commercially available USB cables
Expansion I/O Units can be used to increase the I/O capacity of a CPU Unit (for CPU Units with 30 or 40 I/Opoints).
Expansion Units can be used to add analog I/O or temperature inputs to a CPU Unit with 30 or 40 I/O points.
Quick-response inputs
Input interrupts
Extensive high-speed counter functionality.
Versatile pulse control (Models with transistor outputs only).
Execution of origin searches and origin returns using instructions (Models with transistor outputs only).
weight: 600g max
PWM output function (Models with transistor outputs only).
Changing settings with the analog adjusters.
Built-in RS-232C port on N-type CPU Units.
A Serial Option Board can be added to N-type CPU Units with 30 or 40 I/O points.
AC power supply models
Enclosure: Mounted in a panel
Terminal block: Fixed (not removable)
Terminal screw size: M3
Applicable standards: EC Directive
Grounding method: Ground to 100 ? or less
Supply voltage: 100 to 240 VAC 50/60 Hz
Operating voltage range : 85 to 264 VAC
Inrush current : 120 VAC, 20 A for 8 ms max. for cold start at room temperature, 240 VAC, 40 A for 8 ms max. for cold start at room temperature.
Insulation resistance 20 M? min. (at 500 VDC) between the external AC terminals and GR terminals.
Altitude: 2,000 m max.
Pollution degree : 2 or less: Conforms to JIS B3502 and IEC 61131-2.
Noise resistance : 2 kV on power supply line (Conforms to IEC61000-4-4.)
Overvoltage category: Category II: Conforms to JIS B3502 and IEC 61131-2
EMC Immunity Level: Zone B
Vibration resistance: Conforms to JIS 60068-2-6.
5 to 8.4 Hz with 3.5-mm amplitude
8.4 to 150 Hz, Acceleration of 9.8 m/s2 for 100 min in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)
Shock resistance Conforms to JIS 60068-2-27, 147 m/s2, 3 times in X, Y, and Z directions
Shipping weight: 2 Kg
